ULTIMHEAT : Cabinet thermostat DIN rail mounting. Type Y02N


                       
Main features
Main use: These models have been designed to control the temperature inside electrical cabinets, being mounted on their DIN rail. Their SPDT contact allows their use to control a cabinet heater, a fan or a filter fan, or a cooling system.
Temperature ranges: -10+20°C (14+68°F) ; -10+50°C (14+122°F) ;0-60°C (32-140°F) ;5-35°C (41-95°F) ; 20+80°C (68-176°F)
Set point adjustment: knob
Sensing element: bimetal
Contact type: snap-action contact, open or close on temperature rise, 10(2)A 250VAC, 15(2)A 120VAC
Electrical life: > 10.000 cycles at rated values
Contact resistance: < 10mOhm
Electrical connection: 3 screw terminals, for 1.5 mm² wires
Mounting: Clip for 35mm DIN rail, EN50022
Casing: UL94 V0, PC-ABS, RAL 1010 light grey
Dimensions: 67 x 50 x 35 mm
Operating temperature range: -20 to +80°C (-4+176°F)
Ingress protection: IP30
Main references
°C
Temperature range (°C) Differential (°C) References
-10+50°C 4°C±2°C Y02NAC-10050114L
-10+20°C 4°C±2°C Y02NAC-10020114L
+5+35°C 4°C±2°C Y02NAC005035114L
0+60°C 4°C±2°C Y02NAC000060114L
+20+80°C 4°C±2°C Y02NAC020080114L

°F
Temperature range (°F) Differential (°F) References
15-120°F 7±3°F Y02NAC-10050114P
15-70°F 7±3°F Y02NAC-10020114P
40-95°F 7±3°F Y02NAC005035114P
30-140°F 7±3°F Y02NAC000060114P
70-180°F 7±3°F Y02NAC020080114P
Wiring diagram
Download PDF
Access full catalogue



*ULTIMHEAT &reg is a registered trademark