|
Band heaters
Main Feature
ULTIMHEAT silicone heating elements are made of laminated silicone rubber sheets, vulcanized together through heat and high pressure on both sides of an embedded wire wound heating element. Fiberglass-reinforced silicone rubber gives heater dimensional stability without sacrificing flexibility.
Silicone is used because of its high temperature resistance (permanent temperature up to 200°C (390°F), high thermal conductivity (~7 10-4 W/cm.K) and good electrical insulation properties (~12KV/mm)
A fiberglass grid, which is visible under the surface, reinforces the silicone rubber sheets. The wire wound heating element web covers the entire surface of the heater. This web could be designed such that holes and cut-outs are incorporated on the heater. This construction makes silicone rubber heaters an ideal solution to the requirements of many low and medium temperature applications, which do not conform to the shapes, sizes and dimensions of band, strip, cartridge, tubular and coil heaters.
Main applications
Silicone flexible band heaters are designed to provide process temperature maintenance to metallic and plastic piping, valves, pumps, water meters and are is usually wrapped around the equipment.Technical Features
Length: 250 mm to 700 mm (10” to 30”). On special order: up to 1000mm (40”)
Width: 25, 50 and 75 mm (1”, 2”, 3” )
Dimensional tolerances:
-
0 to 150 mm (0 to 6 inches): +/- 1.5 mm (+/- 1/16 inch)
-
150 to 500 mm (6 to 20 inches) : +/- 3.5 mm (+/- 1/8 inch)
-
500 mm to 1000 mm (20 to 35 inches): +/- 5 mm (+/- 3/16 inch)
Tighter tolerances are available on custom designs if needed
Standard heater thickness without adhesive, leads output not included: 1.60 mm +/- 0.15 mm (0.065 inch +/- 0.005") .Add 0.1 mm (0.005") to above dimensions for foil backing.
Maximum total thickness over leads (horizontal wires output):
Silicone foil minimum bending radius: 0.125" (3.2 mm)
Standard Weight: 0.24 gr/cm² 240 g/m² (8 oz./ft²)
Ingress protection: IP65
Maximum operating temperature: peak 230 °C (446°F), continuous: 200 °C (390 °F)*
Even if silicone heaters can be used at higher temperature, we recommend for a safe and durable use that maximum permanent surface temperature on silicone should not rise more than 160°C and maximum acceptable peak temperature should not rise more than 200°C.
Minimum ambient temperature: -60 °C (-80 °F)*
*These maximum and minimum temperatures apply to silicone heaters only. Restriction will apply for controls
Voltage: 12V to 600V, AC or DC (UL rating is 600 VAC, TUV recognition is max 250 VAC)
Resistance tolerance: -5%/+10% (tighter tolerances are achievable)
Power tolerance: -10% to + 5%
Watt density: The limitation factor is the heating foil maximum acceptable temperature. This temperature is dependent upon three factors:
- Temperature exchange with ambient or surface
- The maximum operating temperature
- Heater temperature control
If the element is temperature controlled sufficiently or the heat is taken away by forced air or a heat sink, the Watt density can range up to 0.8w/cm², (5.2 w/inch²). More typical designs are equal or below 0.4w/cm², (2.6 w/inch²)
Standard watt density:
-0.1 w/cm² (0.64 w/inch²). Warning: When used on plastic pipes or foam insulated pipes, do not use higher than 0.1w/cm² (0.64 w/ inch²) watt density to avoid melting plastic pipes or pipe foam insulation.
-0.2 w/cm² (1.3 w/inch²)
-0.4 w/cm² (2.6 w/inch²)
-0.8 w/cm² (5.2 w/inch²)
Quality control routine tests: Each element is 100% tested for continuity, resistance and insulation. Tests are made according to EN 60335-1 and EN 50106 standards
Dielectric Strength: 1500V AC, 2s, 0.5 mA (single insulation models) or the typical approval agency recommendation of 2 x input voltage +1000 volts.
Insulation resistance: More than 10 Mohms
Surface temperature: Temperature that the silicone rubber heater will attain when suspended in still air at 70 °F (20°C) depends of the watt density. Below 5.2 w/inch², (0.8 w/cm²), the temperature will rise during some minutes and stabilize at a temperature below the critical 500 °F (260°C) which is the highest technically acceptable surface temperature.
Surface temperature after stabilization /watt density |
W/cm² |
0.05 |
0.10 |
0.15 |
0.20 |
0.30 |
0.40 |
0.45 |
0.50 |
0.60 |
0.70 |
0.8 |
0.9 |
1.0 |
Stabilization Temperature °C |
40 |
70 |
90 |
105 |
135 |
165 |
175 |
190 |
210 |
230 |
250 |
260 |
270 |
W/inch² |
0.32 |
0.64 |
0.97 |
1.3 |
1.9 |
2.6 |
2.9 |
3.2 |
3.9 |
4.8 |
5.2 |
5.8 |
6.5 |
Stabilization Temperature °F |
104 |
158 |
194 |
221 |
275 |
329 |
320 |
347 |
410 |
446 |
482 |
500 |
518 |
Leads: Standard leads for heaters are FEP insulated, flexible stranded plated copper wire. They are UL Style 1330 rated for 180°C/ 600 volt operation. Lead types and exit locations are adaptable to application requirements. Standard length is 200 mm.
Standard wire gauges:
AWG22 (or 0.3 mm²) is standard for rating up 3.5A
AWG20 (or 0.5 mm²) is standard for rating from 3.6 to 5.5A
Electrical connection output: standard is wire leads horizontal output. On request we can provide vertical leads output, side output with 6.3 x 0.8 tab terminals or flat cable. Wires can be equipped with terminals on request. Built in connectors must be submitted to our engineering department for feasibility
Terminals options
.jpg)
|
.jpg)
|
.jpg)
|
.jpg)
|
Horizontal wires terminals, FEP insulation (standard) |
Horizontal Flat cable without plug |
Horizontal Flat cable with UL plug |
Horizontal Flat cable with Euro plug |
Built in sensors and safety devices options
On the heaters surface it can be over-molded disc thermostats, temperature sensors, fixed setting bimetal thermostats, thermal cutouts and surface mounting adjustable bimetal thermostat.
.jpg)
|
.jpg)
|
.jpg)
|
.jpg)
|
.jpg) |
.jpg) |
Thermocouple J |
Pt 100 |
Thermal cut out (fuses at preset temperature) |
Disc thermostat (ambient temperature sensing). The thermostat sensing surface must be outside insulation. |
Disc thermostat, surface temperature sensing (manual or automatic reset) |
High limit fixed setting bimetal strip thermostat (snap action, large differential) |
Other Options:
- Adhesive backside for application on various surfaces such as glass, steel, plastic
Main references
Standard flexible silicone band Heaters :
No controls, 200 mm FEP insulated wires, horizontal output, 0.1 to 0.8 w/ cm² (0.64 to 5.2 w/inch² ) |
Band heater, 0,1w/cm², no controls, 2 wires 200 mm FEP insulated
(Click on reference to download drawing) |
reference |
Width mm |
Width inches |
Length mm |
Length inches |
Power Watts |
voltage |
amps |
wire size |
9AS025B58006H200 |
25 |
1,0 |
250 |
9,8 |
6,25 |
220/230 |
0,03 |
AWG22 |
9AS025C08008H200 |
25 |
1,0 |
300 |
11,8 |
7,5 |
220/230 |
0,03 |
AWG22 |
9AS025D08010H200 |
25 |
1,0 |
400 |
15,7 |
10 |
220/230 |
0,04 |
AWG22 |
9AS025E08013H200 |
25 |
1,0 |
500 |
19,7 |
12,5 |
220/230 |
0,05 |
AWG22 |
9AS025F08015H200 |
25 |
1,0 |
600 |
23,6 |
15 |
220/230 |
0,07 |
AWG22 |
9AS025G08018H200 |
25 |
1,0 |
700 |
27,6 |
17,5 |
220/230 |
0,08 |
AWG22 |
9AS050B58013H200 |
50 |
2,0 |
250 |
9,8 |
12,5 |
220/230 |
0,05 |
AWG22 |
9AS050C08015H200 |
50 |
2,0 |
300 |
11,8 |
15 |
220/230 |
0,07 |
AWG22 |
9AS050D08020H200 |
50 |
2,0 |
400 |
15,7 |
20 |
220/230 |
0,09 |
AWG22 |
9AS050E08025H200 |
50 |
2,0 |
500 |
19,7 |
25 |
220/230 |
0,11 |
AWG22 |
9AS050F08030H200 |
50 |
2,0 |
600 |
23,6 |
30 |
220/230 |
0,13 |
AWG22 |
9AS050G08035H200 |
50 |
2,0 |
700 |
27,6 |
35 |
220/230 |
0,2 |
AWG22 |
9AS075D08030H200 |
75 |
3,0 |
400 |
15,7 |
30 |
220/230 |
0,1 |
AWG22 |
9AS075E08038H200 |
75 |
3,0 |
500 |
19,7 |
37,5 |
220/230 |
0,2 |
AWG22 |
9AS075F08045H200 |
75 |
3,0 |
600 |
23,6 |
45 |
220/230 |
0,2 |
AWG22 |
9AS075G08053H200 |
75 |
3,0 |
700 |
27,6 |
52,5 |
220/230 |
0,2 |
AWG22 |
9AS025B55006H200 |
25 |
1,0 |
250 |
9,8 |
6,25 |
110/115 |
0,1 |
AWG22 |
9AS025C05008H200 |
25 |
1,0 |
300 |
11,8 |
7,5 |
110/115 |
0,1 |
AWG22 |
9AS025D05010H200 |
25 |
1,0 |
400 |
15,7 |
10 |
110/115 |
0,1 |
AWG22 |
9AS025E05013H200 |
25 |
1,0 |
500 |
19,7 |
12,5 |
110/115 |
0,1 |
AWG22 |
9AS025F05015H200 |
25 |
1,0 |
600 |
23,6 |
15 |
110/115 |
0,1 |
AWG22 |
9AS025G05018H200 |
25 |
1,0 |
700 |
27,6 |
17,5 |
110/115 |
0,2 |
AWG22 |
9AS050B55013H200 |
50 |
2,0 |
250 |
9,8 |
12,5 |
110/115 |
0,1 |
AWG22 |
9AS050C05015H200 |
50 |
2,0 |
300 |
11,8 |
15 |
110/115 |
0,1 |
AWG22 |
9AS050D05020H200 |
50 |
2,0 |
400 |
15,7 |
20 |
110/115 |
0,2 |
AWG22 |
9AS050E05025H200 |
50 |
2,0 |
500 |
19,7 |
25 |
110/115 |
0,2 |
AWG22 |
9AS050F05030H200 |
50 |
2,0 |
600 |
23,6 |
30 |
110/115 |
0,3 |
AWG22 |
9AS050G05035H200 |
50 |
2,0 |
700 |
27,6 |
35 |
110/115 |
0,3 |
AWG22 |
9AS075D05030H200 |
75 |
3,0 |
400 |
15,7 |
30 |
110/115 |
0,3 |
AWG22 |
9AS075E05150H200 |
75 |
3,0 |
500 |
19,7 |
37,5 |
110/115 |
0,3 |
AWG22 |
9AS075F05045H200 |
75 |
3,0 |
600 |
23,6 |
45 |
110/115 |
0,4 |
AWG22 |
9AS075G05053H200 |
75 |
3,0 |
700 |
27,6 |
52,5 |
110/115 |
0,5 |
AWG22 |
 |
| Reinforced high temperature aluminum adhesive tape
Reference: 96ALTA0550 |
Band heater, 0,2w/cm², no controls, 2 wires 200 mm FEP insulated
(Click on reference to download drawing) |
reference |
Width mm |
Width inches |
Length mm |
Length inches |
Power Watts |
voltage |
amps |
wire size |
9AS025B58013H200 |
25 |
1,0 |
250 |
9,8 |
12,5 |
220/230 |
0,1 |
AWG22 |
9AS025C08015H200 |
25 |
1,0 |
300 |
11,8 |
15 |
220/230 |
0,1 |
AWG22 |
9AS025D08020H200 |
25 |
1,0 |
400 |
15,7 |
20 |
220/230 |
0,1 |
AWG22 |
9AS025E08025H200 |
25 |
1,0 |
500 |
19,7 |
25 |
220/230 |
0,1 |
AWG22 |
9AS025F08030H200 |
25 |
1,0 |
600 |
23,6 |
30 |
220/230 |
0,1 |
AWG22 |
9AS025G08035H200 |
25 |
1,0 |
700 |
27,6 |
35 |
220/230 |
0,2 |
AWG22 |
9AS050B58025H200 |
50 |
2,0 |
250 |
9,8 |
25 |
220/230 |
0,1 |
AWG22 |
9AS050C08030H200 |
50 |
2,0 |
300 |
11,8 |
30 |
220/230 |
0,1 |
AWG22 |
9AS050D08040H200 |
50 |
2,0 |
400 |
15,7 |
40 |
220/230 |
0,2 |
AWG22 |
9AS050E08050H200 |
50 |
2,0 |
500 |
19,7 |
50 |
220/230 |
0,2 |
AWG22 |
9AS050F08060H200 |
50 |
2,0 |
600 |
23,6 |
60 |
220/230 |
0,3 |
AWG22 |
9AS050G08070H200 |
50 |
2,0 |
700 |
27,6 |
70 |
220/230 |
0,3 |
AWG22 |
9AS075D08060H200 |
75 |
3,0 |
400 |
15,7 |
60 |
220/230 |
0,3 |
AWG22 |
9AS075E08075H200 |
75 |
3,0 |
500 |
19,7 |
75 |
220/230 |
0,3 |
AWG22 |
9AS075F08090H200 |
75 |
3,0 |
600 |
23,6 |
90 |
220/230 |
0,4 |
AWG22 |
9AS075G08420H200 |
75 |
3,0 |
700 |
27,6 |
105 |
220/230 |
0,5 |
AWG22 |
9AS025B55013H200 |
25 |
1,0 |
250 |
9,8 |
12,5 |
110/115 |
0,1 |
AWG22 |
9AS025C05015H200 |
25 |
1,0 |
300 |
11,8 |
15 |
110/115 |
0,1 |
AWG22 |
9AS025D05020H200 |
25 |
1,0 |
400 |
15,7 |
20 |
110/115 |
0,2 |
AWG22 |
9AS025E05025H200 |
25 |
1,0 |
500 |
19,7 |
25 |
110/115 |
0,2 |
AWG22 |
9AS025F05030H200 |
25 |
1,0 |
600 |
23,6 |
30 |
110/115 |
0,3 |
AWG22 |
9AS025G05035H200 |
25 |
1,0 |
700 |
27,6 |
35 |
110/115 |
0,3 |
AWG22 |
9AS050B55025H200 |
50 |
2,0 |
250 |
9,8 |
25 |
110/115 |
0,2 |
AWG22 |
9AS050C05030H200 |
50 |
2,0 |
300 |
11,8 |
30 |
110/115 |
0,3 |
AWG22 |
9AS050D05040H200 |
50 |
2,0 |
400 |
15,7 |
40 |
110/115 |
0,4 |
AWG22 |
9AS050E05050H200 |
50 |
2,0 |
500 |
19,7 |
50 |
110/115 |
0,5 |
AWG22 |
9AS050F05060H200 |
50 |
2,0 |
600 |
23,6 |
60 |
110/115 |
0,5 |
AWG22 |
9AS050G05070H200 |
50 |
2,0 |
700 |
27,6 |
70 |
110/115 |
0,6 |
AWG22 |
9AS075D05060H200 |
75 |
3,0 |
400 |
15,7 |
60 |
110/115 |
0,5 |
AWG22 |
9AS075E05075H200 |
75 |
3,0 |
500 |
19,7 |
75 |
110/115 |
0,7 |
AWG22 |
9AS075F05090H200 |
75 |
3,0 |
600 |
23,6 |
90 |
110/115 |
0,8 |
AWG22 |
9AS075G05105H200 |
75 |
3,0 |
700 |
27,6 |
105 |
110/115 |
1,0 |
AWG22 |
|
| Reinforced high temperature aluminum adhesive tape
Reference: 96ALTA0550 |
Band heater, 0,4w/cm², no controls, 2 wires 200 mm FEP insulated
(Click on reference to download drawing) |
reference |
Width mm |
Width inches |
Length mm |
Length inches |
Power Watts |
voltage |
amps |
wire size |
9AS025B58025H200 |
25 |
1,0 |
250 |
9,8 |
25 |
220/230 |
0,1 |
AWG22 |
9AS025C08030H200 |
25 |
1,0 |
300 |
11,8 |
30 |
220/230 |
0,1 |
AWG22 |
9AS025D08040H200 |
25 |
1,0 |
400 |
15,7 |
40 |
220/230 |
0,2 |
AWG22 |
9AS025E08050H200 |
25 |
1,0 |
500 |
19,7 |
50 |
220/230 |
0,2 |
AWG22 |
9AS025F08060H200 |
25 |
1,0 |
600 |
23,6 |
60 |
220/230 |
0,3 |
AWG22 |
9AS025G08070H200 |
25 |
1,0 |
700 |
27,6 |
70 |
220/230 |
0,3 |
AWG22 |
9AS050B58050H200 |
50 |
2,0 |
250 |
9,8 |
50 |
220/230 |
0,2 |
AWG22 |
9AS050C08060H200 |
50 |
2,0 |
300 |
11,8 |
60 |
220/230 |
0,3 |
AWG22 |
9AS050D08080H200 |
50 |
2,0 |
400 |
15,7 |
80 |
220/230 |
0,3 |
AWG22 |
9AS050E08100H200 |
50 |
2,0 |
500 |
19,7 |
100 |
220/230 |
0,4 |
AWG22 |
9AS050F08120H200 |
50 |
2,0 |
600 |
23,6 |
120 |
220/230 |
0,5 |
AWG22 |
9AS050G08140H200 |
50 |
2,0 |
700 |
27,6 |
140 |
220/230 |
0,6 |
AWG22 |
9AS075D08120H200 |
75 |
3,0 |
400 |
15,7 |
120 |
220/230 |
0,5 |
AWG22 |
9AS075E08150H200 |
75 |
3,0 |
500 |
19,7 |
150 |
220/230 |
0,7 |
AWG22 |
9AS075F08180H200 |
75 |
3,0 |
600 |
23,6 |
180 |
220/230 |
0,8 |
AWG22 |
9AS075G08210H200 |
75 |
3,0 |
700 |
27,6 |
210 |
220/230 |
0,9 |
AWG22 |
9AS025B55025H200 |
25 |
1,0 |
250 |
9,8 |
25 |
110/115 |
0,2 |
AWG22 |
9AS025C05030H200 |
25 |
1,0 |
300 |
11,8 |
30 |
110/115 |
0,3 |
AWG22 |
9AS025D05040H200 |
25 |
1,0 |
400 |
15,7 |
40 |
110/115 |
0,4 |
AWG22 |
9AS025E05050H200 |
25 |
1,0 |
500 |
19,7 |
50 |
110/115 |
0,5 |
AWG22 |
9AS025F05060H200 |
25 |
1,0 |
600 |
23,6 |
60 |
110/115 |
0,5 |
AWG22 |
9AS025G05070H200 |
25 |
1,0 |
700 |
27,6 |
70 |
110/115 |
0,6 |
AWG22 |
9AS050B55050H200 |
50 |
2,0 |
250 |
9,8 |
50 |
110/115 |
0,5 |
AWG22 |
9AS050C05060H200 |
50 |
2,0 |
300 |
11,8 |
60 |
110/115 |
0,5 |
AWG22 |
9AS050D05080H200 |
50 |
2,0 |
400 |
15,7 |
80 |
110/115 |
0,7 |
AWG22 |
9AS050E05100H200 |
50 |
2,0 |
500 |
19,7 |
100 |
110/115 |
0,9 |
AWG22 |
9AS050F05120H200 |
50 |
2,0 |
600 |
23,6 |
120 |
110/115 |
1,1 |
AWG22 |
9AS050G05150H200 |
50 |
2,0 |
700 |
27,6 |
140 |
110/115 |
1,3 |
AWG22 |
9AS075D05120H200 |
75 |
3,0 |
400 |
15,7 |
120 |
110/115 |
1,1 |
AWG22 |
9AS075E05150H200 |
75 |
3,0 |
500 |
19,7 |
150 |
110/115 |
1,4 |
AWG22 |
9AS075F05180H200 |
75 |
3,0 |
600 |
23,6 |
180 |
110/115 |
1,6 |
AWG22 |
9AS075G05210H200 |
75 |
3,0 |
700 |
27,6 |
210 |
110/115 |
1,9 |
AWG22 |
|
| Reinforced high temperature aluminum adhesive tape
Reference: 96ALTA0550 |
Band heater, 0,8w/cm², no controls, 2 wires 200 mm FEP insulated
(Click on reference to download drawing) |
reference |
Width mm |
Width inches |
Length mm |
Length inches |
Power Watts |
voltage |
amps |
wire size |
9AS025B58050H200 |
25 |
1,0 |
250 |
9,8 |
50 |
220/230 |
0,2 |
AWG22 |
9AS025C08060H200 |
25 |
1,0 |
300 |
11,8 |
60 |
220/230 |
0,3 |
AWG22 |
9AS025D08080H200 |
25 |
1,0 |
400 |
15,7 |
80 |
220/230 |
0,3 |
AWG22 |
9AS025E08100H200 |
25 |
1,0 |
500 |
19,7 |
100 |
220/230 |
0,4 |
AWG22 |
9AS025F08120H200 |
25 |
1,0 |
600 |
23,6 |
120 |
220/230 |
0,5 |
AWG22 |
9AS025G08140H200 |
25 |
1,0 |
700 |
27,6 |
140 |
220/230 |
0,6 |
AWG22 |
9AS050B58100H200 |
50 |
2,0 |
250 |
9,8 |
100 |
220/230 |
0,4 |
AWG22 |
9AS050C08120H200 |
50 |
2,0 |
300 |
11,8 |
120 |
220/230 |
0,5 |
AWG22 |
9AS050D08160H200 |
50 |
2,0 |
400 |
15,7 |
160 |
220/230 |
0,7 |
AWG22 |
9AS050E08200H200 |
50 |
2,0 |
500 |
19,7 |
200 |
220/230 |
0,9 |
AWG22 |
9AS050F08120H200 |
50 |
2,0 |
600 |
23,6 |
240 |
220/230 |
1,0 |
AWG22 |
9AS050G08280H200 |
50 |
2,0 |
700 |
27,6 |
280 |
220/230 |
1,2 |
AWG22 |
9AS075D08240H200 |
75 |
3,0 |
400 |
15,7 |
240 |
220/230 |
1,0 |
AWG22 |
9AS075E08300H200 |
75 |
3,0 |
500 |
19,7 |
300 |
220/230 |
1,3 |
AWG22 |
9AS075F08360H200 |
75 |
3,0 |
600 |
23,6 |
360 |
220/230 |
1,6 |
AWG22 |
9AS075G08420H200 |
75 |
3,0 |
700 |
27,6 |
420 |
220/230 |
1,8 |
AWG22 |
9AS025B55050H200 |
25 |
1,0 |
250 |
9,8 |
50 |
110/115 |
0,5 |
AWG22 |
9AS025C05060H200 |
25 |
1,0 |
300 |
11,8 |
60 |
110/115 |
0,5 |
AWG22 |
9AS025D05080H200 |
25 |
1,0 |
400 |
15,7 |
80 |
110/115 |
0,7 |
AWG22 |
9AS025E05100H200 |
25 |
1,0 |
500 |
19,7 |
100 |
110/115 |
0,9 |
AWG22 |
9AS025F05120H200 |
25 |
1,0 |
600 |
23,6 |
120 |
110/115 |
1,1 |
AWG22 |
9AS025G05140H200 |
25 |
1,0 |
700 |
27,6 |
140 |
110/115 |
1,3 |
AWG22 |
9AS050B55100H200 |
50 |
2,0 |
250 |
9,8 |
100 |
110/115 |
0,9 |
AWG22 |
9AS050C05120H200 |
50 |
2,0 |
300 |
11,8 |
120 |
110/115 |
1,1 |
AWG22 |
9AS050D05160H200 |
50 |
2,0 |
400 |
15,7 |
160 |
110/115 |
1,5 |
AWG22 |
9AS050E05200H200 |
50 |
2,0 |
500 |
19,7 |
200 |
110/115 |
1,8 |
AWG22 |
9AS050F05240H200 |
50 |
2,0 |
600 |
23,6 |
240 |
110/115 |
2,2 |
AWG22 |
9AS050G05280H200 |
50 |
2,0 |
700 |
27,6 |
280 |
110/115 |
2,5 |
AWG22 |
9AS075D05240H200 |
75 |
3,0 |
400 |
15,7 |
240 |
110/115 |
2,2 |
AWG22 |
9AS075E05300H200 |
75 |
3,0 |
500 |
19,7 |
300 |
110/115 |
2,7 |
AWG22 |
9AS075F05360H200 |
75 |
3,0 |
600 |
23,6 |
360 |
110/115 |
3,3 |
AWG22 |
9AS075G05420H200 |
75 |
3,0 |
700 |
27,6 |
420 |
110/115 |
3,8 |
AWG20 |
Adhesive backside: for application on various surfaces such as glass, steel, plastic replace the last character (0) by A
Warning:
- Silicone rubber heaters are not suitable for: radiation, vacuum, or prolonged exposure to oil
- When these bands are used on thermally insulated pipes, they must be installed under the insulation and always in contact with the pipe surface. We recommend fixing them on the equipment with armed adhesive tape (permanent installation) or cable ties (temporary installation).
Design Services:
Our experienced designers can assist in your design efforts to build a surface heater specifically for your application. In addition, we can look to optimize your current element designs and recommend proper watt densities, controls and element construction. We will conduct a thorough design review and present a proposal and quotation, followed by sample elements upon approval. We also provide testing services and gather agency approvals to verify and ensure that the element construction and design will be optimal for your application.
|
Download Band heaters catalog |
 |
 |
 |
|
