DIMENSIONS 
 |
MAIN FEATURES
SENSING ELEMENT: hygroscopic polymer film with special treatment, guaranteeing a fast response, long lifetime and high stability
HOUSING: Fiber glass Makrolon, high humidity resistance, very high electrical insulation properties. Do not use in places with risk of condensation.
MOUNTING: front side mounting by two screws, 30 mm distance. The same mounting is also available at the backside.
SETTING: with 6.4 mm diameter shaft, 14 mm long, with 4 mm flat, located on the small lateral side
SHAFT ROTATION: Standard mechanical rotation 295°.
ADJUSTMENT RANGE: Range 20-80%: on 235 ° angular. Range 10-60%: on 224 ° angular.
CALIBRATION: at mid position at 42% RH and 22 ° C. Calibration tolerance at mid point: + / -5% relative humidity. Minimum and maximum positions have positive contact actuation
CONTACT STYLE: • SPDT, the NC opens when the relative humidity goes above the set-point (humidification applications), the NO contact closes when the relative humidity goes above the set-point (ventilation or dehumidification applications) • NC: NC opens when the relative humidity goes above the set-point (humidification applications) • NO: NO contact closes when the relative humidity goes above the set-point ( ventilation or dehumidification applications)
CONTACT MATERIAL:
• Gold plated silver: recommended when storage at high humidity conditions may occur, or when the product is used in low voltage application (electronic control boards)
• Silver: recommended for standard resistive load application or low inductive loads
ELECTRICAL CONNECTIONS: 6.3 x 0.8 mm tabs
AMBIENT CONDITIONS : Humidity: 5 to 95% without condensation Ambient temperature: 5 to 40°C
RATING: • UL and CSA: 6A resistive, 20A LRA, FLA 3.7A, 240V • EC: 6A resistive, (3.7A inductive) 250V
OPTIONS: Change in angular position, reverse rotation, flat and shaft length and orientation change (with MOQ and/or tooling cost) |
|
|
REFERENCES : (Mechanical knob rotation 295 °, 14 mm long shat, flat horizontal position topside at mid adjustment range)
Contact style |
Gold plated contact |
Silver contact |
Adjustment range |
Rotation to increase set-point |
NC |
Q88S1G14H1060900 |
Q88S1S14H1060900 |
10-60% |
Clockwise |
NO |
Q88S2G14C2080900 |
Q88S2S14C2080900 |
20-80% |
Counter-clockwise |
SPDT |
Q88S3G14C2080900 |
Q88S3S14C2080900 |
20-80% |
Counter-clockwise |
Accessories
Knobs for humidistats with 6.3mm dia. shaft
 |
 |
20-60% RH printed knob, counterclockwise set point increase, for 6.35mm shafts with 4mm flat.
Reference |
66MRW640200602AB |
|
 |
 |
20-60% RH printed knob, clockwise set point increase, for 6.35mm shafts with 4mm flat.
Reference |
66MRW64020060BAB |
|
 |
 |
20-80% RH printed knob, counterclockwise set point increase, for 6.35mm shafts with 4mm flat.
Reference |
66MRW640200802AB |
|
 |
 |
20-80% RH printed knob, counterclockwise set point increase, for 6.35mm shafts with 4mm flat.
Reference |
66MRW64020080BAB |
|
|
|