APPLICATION AREAS

Air & Fluid heating solutions

This field of activity is the largest in our company, as heating of air and liquids is present all around us. Heating and temperature control systems that we have in our homes, businesses, and infrastructures provide us with comfort and safety in our daily lives.

We offer a range of products that are applied to different use cases, such as:

Temperature control and safety for appliances and users in the house hold appliances industry.

Thermostats and safety devices used in water heaters, heat pumps, ovens, fryers, heating appliances, coffee machines, saunas, and steam generators.

Different technologies coexist, such as:

  • Mechanical thermostats and safety devices with liquid expansion (bulb and capillary) or rod expansion (probe). They are used to ensure the regulation and/or safety of heating or cooling systems. We offer very high temperature versions (>320°C) for specific applications such as pizza ovens, or on the other hand a frost-proof version, dedicated to extreme conditions.
    Available in single-phase or three-phase, with automatic or manual reset, we can offer them incorporated in plastic or aluminum protection housings that meet different degrees of protection (IP65 and IK10) and corrosion.
    Several accessories make it easier to fix or customise them: glove finger, adjustment knob, axis switch, flanges, custom caps, etc.
  • Disc type thermostats and safety devices for surface applications for hot plates, as well as antifreeze and defrosting. They can be over molded to resist condensation, mounted at the end of a cable.
    Different types of cladding can be offered or developed according to your needs.
  • Electronic temperature regulators that have adjustable parameters, display, and a remote temperature probe.
  • Sacrificial limiters (thermal fuses) that can be coated with silicone protection depending on the application.

For sensitive environments and explosive atmospheres, our range of ATEX-approved thermostats and safety devices, as well as their reinforced housings, will provide you with the appropriate safety levels.

Liquids heating

  • A wide range of immersion heaters that are widely used today in buffer tanks, storage tanks, and electric radiators with heat transfer fluid. Different materials are offered, up to the all-stainless steel model without brazing. A wide and deep range accompanied by a wide selection of housings that can with stand the most extreme conditions, which can be customised to suit your application.
  • Stainless steel / titanium heaters for balneotherapy, spas, swimming pools, and jacuzzis, equipped with their fixing system.
  • Flexible silicone heating belts and jackets, adapted to drums of different capacities, for industrial, chemical, or agricultural applications in the control of the viscosity of paints, oils, greases, molasses, mastics, resins, syrups, etc.
  • Electric tracing solutions consisting of flexible silicone tapes that can be used to maintain the operating temperature or prevent freezing of pipes, gutters, valves, pumps, water meters, etc.

Air heating

Our expertise as a manufacturer of armored resistances allows us to offer different levels of finish and integration, such as:


  • Heating elements with flange or fins for integration
  • Compact terminal batteries for air conditioning, for integration into ventilated ducts, to boost an air-to-air heat pump installation whose power is insufficient in extreme weather conditions.
  • Heating sub-assemblies used as heaters for ventilated cabinets and electrical boxes to prevent condensation, which can cause malfunctions and corrosion.
  • Finned tubular heaters for fan heaters, convection heaters. 304L stainless steel sheath. Optional: SS 201, 316, 321, or Incolloy 800
  • Industrial convectors or infrared radiant heaters, robust and waterproof, for outdoor use. Their main applications are the heating of small volumes such as construction bungalows, crane cabins, public works machinery, wagons, or railway cabs.

These products can be customised to meet your needs and application.

Please do not hesitate to contact us with your requirements. We will be happy to study them and give you the best advice.

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

Type MA - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable, for incorporation, SPDT contact

See Product
Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

Type MB - Adjustable set point positive pressure switches, Snap action contact pressure switches, field adjustable,SPDT contact, optional IP65 enclosure

See Product
Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

Type ZK - Snap action contact air switch, single pole, momentary or latching action New high sensivity types

See Product
Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

Type BK - Very high temperature steatite connection blocks. Indirect pressure clamping, with pressure plate, 750V range

See Product
Type BJ - Steatite connection blocks 450V range

Type BJ - Steatite connection blocks 450V range

See Product
Type BH - Ceramic insulators for heating elements, 400V range

Type BH - Ceramic insulators for heating elements, 400V range

See Product
Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

Type BM - Ceramic terminal blocks for 3 phase asynchronous electrical motors 450V range (BM154,BM185,BM205,BM235,BM256,BM286,BM358)

See Product
Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

Type 5MA3-F - Wired thermal fuses, for insertion into 8.5mm I.D. pocket (thermowells)

See Product
Waterproof wall feed-through for adjustment shafts

Waterproof wall feed-through for adjustment shafts

See Product
Pocket tubes, Pocket grommets, flanges and fittings

Pocket tubes, Pocket grommets, flanges and fittings

See Product
Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

Type 9VJAD - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, surface mounted, for metal containers

See Product
Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

Type 9VJ32 - Antifreeze flexible jacket heaters for glass or plastic containers

See Product
Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

Type 9JDF - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Digital display electronic temperature controller, remote wall mounting

See Product
Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

Type 9VJF6 - Fixed temperature setting flexible jacket heaters for metal drums and 1000 liters IBC

See Product
Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WR-Z - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WR-X, Y8WR-Y - Electronic thermostat, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WJ-Z - Electronic Temp. controller, double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

Type Y8WJ-X, Y8WJ-Y - Electronic T° controller with double digital display, multi-sensors, PID or ON-OFF action, heat trace pipe temperature control, remote wall mounting

See Product
Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

Type Y8WH-Z - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, vertical foot mounting on pipe

See Product
Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

Type Y8WH-X, Y8WH-Y - Electronic temperature controller with digital display, NTC sensor, for heat trace pipe temperature control, remote wall mounting

See Product
Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

Type Y1A2P, Y1B2P - Electronic room thermostats for heat tracing, metal box

See Product
Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

Type Y0D8, Y0D9 - “Pigtail” bulb room thermostat, with built-in pilot light and 2 M20 cable glands for heat tracing application

See Product
Type YF62NC - Electronic room thermostats for heat tracing

Type YF62NC - Electronic room thermostats for heat tracing

See Product
Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

Type YF7GNC - “Pigtail” bulb room thermostats for heat tracing

See Product
Type Y381 - Temperature sensor, thermostat or level sensor enclosure

Type Y381 - Temperature sensor, thermostat or level sensor enclosure

See Product
TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

TYpe Y3A4 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A3 - Miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A2 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

Type Y3A1 - Sub-miniature enclosure for temperature sensor, level sensor, electronic printed circuit or cartridge heater

See Product
Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

Type Y307 - Big size enclosure for immersion heater, temperature sensor, level sensor or controls

See Product
Type Y306- Round enclosure for immersion heater or temperature sensor

Type Y306- Round enclosure for immersion heater or temperature sensor

See Product
Type Y305 - Enclosure for immersion heater

Type Y305 - Enclosure for immersion heater

See Product
Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

Type Y304 - Enclosure for immersion heater, level sensor or temperature sensor

See Product
Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

Tye Y303 - Miniature enclosure for immersion heater, level sensor or temperature sensor

See Product
Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

Type Y3S7 - Big size enclosure for immersion heater or temperature sensor

See Product
Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

Type Y3S5 - Medium size enclosure for immersion heater or temperature sensor

See Product
Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

Type Y3C6 - Polypropylene immersion heater enclosure for surface treatment baths and highly corrosive environments

See Product
Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

Type DT4 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, 6.35 × 0.8 QC terminals, ½"BSPP thread

See Product
Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

Type DT3 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½”BSPP thread

See Product
Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

Type DT1 - Horizontal mounting, reed switch contact, PBT stem, hollow PBT float, Cable output, ½" NPT thread

See Product
Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

Type DM6- Vertical mounting, reed switch contact, polypropylene stem with side mounting bracket, dia. 29 × 16.4mm EPS foam float,

See Product
Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

Type DM5 - Vertical mounting, reed switch contact, polypropylene stem, dia. 20 × 16.4mm EPS foam float, cable output, side mounting bracket

See Product
Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

Type DM3 - Vertical mounting, reed switch contact, polypropylene stem with M8 thread, cable output dia. 20 × 16.4mm EPS foam float

See Product
Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

Type DM1 - Reed switch contact, stem with M8 thread, cable output, dia. 25 × 15mm polypropylene float

See Product
Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

Type 9STQ - Immersion heaters 182×130×132mm plastic enclosure. Fittings 1"1/4, 1"1/2, M45x2. Electronic PID, with or without manual reset thermostat.

See Product
Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

Type Y261 - 3 parallel ways connection box for heat tracing cables, with built-in antifreeze thermostat

See Product
Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

Type Y260 - 3 parallel ways connection box for heat tracing cables, without thermostat

See Product
Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

Type Y29C, Y29D - Connection box, pipe mounting leg, for two traditional or self-regulating cables, one power supply cable and temperature sensor cable

See Product
Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y28 - 4 cross ways connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

See Product
Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

Type 9T10 - Cartridge heaters dia. 10mm, with built-in thermostat, M14 × 1.5 thread

See Product
Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

Type 9STJ - Full stainless steel immersion heater, without brazing, 105×105×100mm stainless steel enclosure. Stainless steel 1"1/2 fitting.

See Product
Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

Type 9STB - Immersion heaters 182×130×120mm plastic enclosure. Fittings 1"1/2, M45x2. With mechanical or electronic temperature control.

See Product
Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

Type 9ST5 - Standard immersion heater with aluminum enclosure, 105 × 105 × 96mm, with and without thermostat

See Product
Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

Type 9ST4 - Immersion heater with 78mm × 78mm × 74mm aluminum enclosure. 1"1/4, 1"1/2, M45x2 fittings. With or without thermostat.

See Product
Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

Type 9ST2 - Immersion heater with round enclosure, dia. 58 × 75mm. 1"1/4, 1"1/2, M45x2 fittings.

See Product
Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

Type 9SFN202, 9SFN502 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element, with connection box

See Product
Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

Type 9SFN200, 9SFN500 - Renewable energy 1"1/2 and M45x2 immersion heaters, 12 and 24V power supply with 230V auxiliary heating element

See Product
Type 9RSU3 - Full stainess steel immersion heaters with 3 hairpin heating elements, TIG welded stainless steel fitting, cylindrical thread 1”1/2 BSPP; M45x2

Type 9RSU3 - Full stainess steel immersion heaters with 3 hairpin heating elements, TIG welded stainless steel fitting, cylindrical thread 1”1/2 BSPP; M45x2

See Product
Type 9RBU3 - Immersion heaters with 3 hairpin heating elements, brazed brass fitting, with cylindrical thread 1”1/4 BSPP; 1”1/2 BSPP; M45x2

Type 9RBU3 - Immersion heaters with 3 hairpin heating elements, brazed brass fitting, with cylindrical thread 1”1/4 BSPP; 1”1/2 BSPP; M45x2

See Product
Type 4YC - Miniature temperature limiters, calibration up to 90°C (194°F), to use when R290 may be present

Type 4YC - Miniature temperature limiters, calibration up to 90°C (194°F), to use when R290 may be present

See Product
Type 9AD - Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing

Type 9AD - Heating flat ribbons in silicone, width 35 mm, maximum length 10m, for electric tracing

See Product
Type 9VJV6 - Fixed temperature setting flexible jacket heaters for glass or plastic containers

Type 9VJV6 - Fixed temperature setting flexible jacket heaters for glass or plastic containers

See Product
Type Y8WTZ - Stirrer speed controller with IP65 enclosure and compact full stainless steel stirrer for drums and IBC

Type Y8WTZ - Stirrer speed controller with IP65 enclosure and compact full stainless steel stirrer for drums and IBC

See Product
Type 9SWR2 - Immersion heater for 1000 liters IBC

Type 9SWR2 - Immersion heater for 1000 liters IBC

See Product
Type 9V4 - Base heater for 55 gallons metal drum

Type 9V4 - Base heater for 55 gallons metal drum

See Product
Type 9VJMA - Flexible jacket heaters with adjustable electronic thermostat, surface mounted, for glass or plastic containers

Type 9VJMA - Flexible jacket heaters with adjustable electronic thermostat, surface mounted, for glass or plastic containers

See Product
Type 9VJEF - Flexible jacket heaters with remote digital display electronic controller for glass or plastic containers

Type 9VJEF - Flexible jacket heaters with remote digital display electronic controller for glass or plastic containers

See Product
Type 9SU113 - Standard liquids heaters 70mm diameter, length 130mm, 1" fittings

Type 9SU113 - Standard liquids heaters 70mm diameter, length 130mm, 1" fittings

See Product
Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

Type 4VA, VB - Miniature temperature limiters, not current sensing, calibration up to 100°C (212°F), cable or wires connection

See Product
Type 9VJBF - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers, adjustment up to 120°C, remote wall mounting

Type 9VJBF - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers, adjustment up to 120°C, remote wall mounting

See Product
Type 9VJBE - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 Miniature electronic thermostats, adjustment by 20-125°C knobs

Type 9VJBE - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 Miniature electronic thermostats, adjustment by 20-125°C knobs

See Product
Type 9VJBD - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers

Type 9VJBD - Jacket heaters for 1000L IBC containers. Two independent heating zones. 2 digital display electronic temperature controllers

See Product
Type 9VJAF - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, remote wall mounting, for metal containers

Type 9VJAF - Flexible jacket heaters with digital display electronic controller, adjustable up to 120°C, remote wall mounting, for metal containers

See Product
Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

Type 9VJDA - Jacket heaters for 1000L IBC containers with tubular steel frame. One heating zone. Miniature electronic thermostat

See Product
Type 9VJAE - Flexible jacket heaters with 20-125°C adjustable electronic thermostat, surface mounted, for metal containers

Type 9VJAE - Flexible jacket heaters with 20-125°C adjustable electronic thermostat, surface mounted, for metal containers

See Product
Type 9SQ - Air heating elements for incorporation with tubular sheathed heating element, thermostat and high limit.

Type 9SQ - Air heating elements for incorporation with tubular sheathed heating element, thermostat and high limit.

See Product
Type 9CH - Commercial and industrial convection radiators Upward blowing models

Type 9CH - Commercial and industrial convection radiators Upward blowing models

See Product
Type 9CG1 - Commercial and industrial convection radiators 110mm compact range, IP65, without fan

Type 9CG1 - Commercial and industrial convection radiators 110mm compact range, IP65, without fan

See Product
Type 9CB - Industrial electric baseboard heaters, natural convection, width 130mm, IP69K, IK10

Type 9CB - Industrial electric baseboard heaters, natural convection, width 130mm, IP69K, IK10

See Product
Type 9CA - Small industrial electric baseboard heaters, IP69K, IK10, with 1 or 2 finned heating elements

Type 9CA - Small industrial electric baseboard heaters, IP69K, IK10, with 1 or 2 finned heating elements

See Product
Type 9AC - Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-120°C or 0-200°C

Type 9AC - Silicone rubber heating belts for metal drums, with remote electronic control, on-off action, 0-120°C or 0-200°C

See Product
Type 9AB - Silicone rubber heating belts for metal drums, with surface mounted bulb and capillary thermostat

Type 9AB - Silicone rubber heating belts for metal drums, with surface mounted bulb and capillary thermostat

See Product
Type Y27 - 3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

Type Y27 - 3 ways “Tee” connection box for heat tracing cables, without thermostat, for traditional or self-regulating cables

See Product
Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

Type 6YTNM - Silicone sleeves for connection of heating cable on power supply wires (field or workshop assembly). Filling with room temperature vulcanizing silicone resin (RTV)

See Product
Type BC - Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate, 750V range

Type BC - Very high temperature steatite connection blocks Indirect pressure clamping, with pressure plate, 750V range

See Product
Type BA - Steatite connection blocks, 250V range With pressure screws, protected against electric shock

Type BA - Steatite connection blocks, 250V range With pressure screws, protected against electric shock

See Product
Type R20 - Flap flow switches, reed switch contact, ½" BSPP male thread

Type R20 - Flap flow switches, reed switch contact, ½" BSPP male thread

See Product
Type R35 - Piston flow switches, reed switch contact, inlet and outlet ½" BSPP male,

Type R35 - Piston flow switches, reed switch contact, inlet and outlet ½" BSPP male,

See Product
Type R15 - All stainless steel paddle flow switch, 16A snap action switch, ¾" male thread

Type R15 - All stainless steel paddle flow switch, 16A snap action switch, ¾" male thread

See Product
Type R1V - Paddle flow switches, reed switch contact, external brass body

Type R1V - Paddle flow switches, reed switch contact, external brass body

See Product
Type R1Z2 - Paddle flow switches, reed switch contact, low voltage simplified model.

Type R1Z2 - Paddle flow switches, reed switch contact, low voltage simplified model.

See Product
Types R1S, R1F - Paddle flow switches, reed switch contact, ½" male thread, long paddle.

Types R1S, R1F - Paddle flow switches, reed switch contact, ½" male thread, long paddle.

See Product
Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y514 - 4 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

See Product
Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

Type Y501, 502 - 2 ways in line connection box for heat tracing cables, with insulation piercing terminals, for self-regulating cables

See Product
Type Y25 - 3 ways in T connection box for heat tracing cables,  for traditional or self-regulating cables

Type Y25 - 3 ways in T connection box for heat tracing cables, for traditional or self-regulating cables

See Product
Type Y24 - 2 ways in line connection box for heat tracing cables,  for traditional or self-regulating cables

Type Y24 - 2 ways in line connection box for heat tracing cables, for traditional or self-regulating cables

See Product
Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

Type Y22 - 2 parallel ways connection box for heat tracing cables, with 2 pilot lights and built-in antifreeze thermostat

See Product
Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

Type TNJB, TPJB, TSJB, TJJB - M20x1.5 temperature sensors for mounting in cable glands holes or threads

See Product
Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

Type 49JB - M20x1.5 Thermostats for mounting in cable glands holes or threads, for boxes external ambient temperature control

See Product
Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

Type 49C - Thermostats overmolded on heat tracing cables supplied by customer

See Product

Application domain's products

Find our products

We produce over 6 million components per year and manage over 10,000 codes
for finished products. View and download our catalogs to stay up-to-date!